Update or customize the synth
go to this page for more informations
DIY eurorack power supply
this page describe a “Do It Yourself” eurorack power supply based on cheap component.
Wood stand for 1 synth
This stand offer 2 different synth inclination depending on it’s orientation. (about 30° or 60°).
[slideshow_deploy id=’3109′]
To build this stand, you have to cut 9mm plywood according to this schematics: (This schematics have to be modify if you use a material with a different thickness)
DXF schematics of a 1 synth stand
Units are in mm, this file have been optimized for a 6mm drill CNC.
Wood stand for 2 synths
This stand offer 2 different synth inclination depending on it’s orientation. (about 10° and 60° or 30° and 80°).
[slideshow_deploy id=’3114′]
To build this stand, you have to cut 9mm plywood according to this schematics: (This schematics have to be modify if you use a material with a different thickness)
DXF schematics of a dual synth stand
Units are in mm, this file have been optimized for a 6mm drill CNC.
Use analog LFO out to control an eurorack synth
The PCB hold 3 soldering Pad that output GATE, LFO1 and LFO2. The GATE information is a 0/3.3V digital value. The LFOs output are analogue, between about 0.5 and 2.8V. You can use this electronic schematics to convert them to -5/+5V common in most analog synth.
