Resources

Update or customize the synth

go to this page for more informations

Wood stand for 1 synth

This stand offer 2 different synth inclination depending on it’s orientation. (about 30° or 60°).


To build this stand, you have to cut 9mm plywood according to this schematics: (This schematics have to be modify if you use a material with a different thickness)
DXF schematics of a 1 synth stand
This file have been optimized for a 6mm drill CNC

Wood stand for 2 synths

This stand offer 2 different synth inclination depending on it’s orientation. (about 10° and 60° or 30° and 80°).


To build this stand, you have to cut 9mm plywood according to this schematics: (This schematics have to be modify if you use a material with a different thickness)
DXF schematics of a dual synth stand
This file have been optimized for a 6mm drill CNC

Use analog LFO out to control an eurorack synth

The PCB hold 3 soldering Pad that output GATE, LFO1 and LFO2. The GATE information is a 0/3.3V digital value. The LFOs output are analogue, between about 0.5 and 2.8V. You can use this electronic schematics to convert them to -5/+5V common in most analog synth.